Accessories

Model 7500-OFLG - 3''x3'' Fluorescent Orange Flag on 4.5'' rod which plugs into either MightyFlare™ or MightyFlare Stick™ LED Road Flares for improving their daytime visibility

Model 7500-FLS8 - Set of (8) 3'' x 3'' Fluorescent Orange Flags each on 4.5'' long rod, in a Tube Shaped Carrier

Model 7500-CH4A - Battery Charger for Rechargeable NiMH ''AA'' Batteries. Charges 1 to 4 Batteries each independently to assure complete charging of each battery. Plugs into 120 V outlet but includes adaptor for 12 VDC charging. Batteries available separately.

Model 7500-HOLL - Black Leather Holster for Belts between 1 and 2-1/4 '' wide and for holding SaberWand™ Traffic Wands or BeastBeam™ Flashlights

Model 7500-HOLP - Black Polymer Holster for belts between 1 and 2-1/4'' wide. Holds all SaberWand® Traffic Wands & BeastBeam™ Flashlights. Light is pushed into holster and retained by friction. Holster also permits swiveling or non swiveling of light on belt.

Model 7500-HOLS - Black Polymer Holster/Clip for belts or other straps between 3/4'' and 1'' wide. Holds all SaberWand® Traffic Wands & BeastBeam™ Flashlights. Light is snaped onto the clip for holding to belt and must be rotated away from the clip to be removed. Design permits optional swiveling of lights on belt.

Model 7500-HAMR - Hammer for Driving 11'' Tent Pins ( Model 7500-TNTP) into ground

Model 7500-HBAS - Heavy Base for placement on a horizontal surface or table for Snap IN/OUT vertical holding of all BeastBeam™ Flashlights, BeastBeam™ Signal Light Models 7000-7110 or Saberwand® Traffic Wands that do not have pocket clips

Model 7500-HCLP Heavy-Duty Polymer Pocket Clip attaches to all SaberWand™ Traffic Wands and BeastBeam™ Flashlights. This may be added anytime

Model 7500-HLKB - Helmet Mounting Bracket / Band for attaching all BeastBeam™ Flashlights (Lights Sold Separately) to a Firefighter's Leatherhead Helmet

Model 7500-HLKC - Helmet Mounting Bracket for attaching all BeastBeam™ Flashlights (Lights Sold Separately) to a Construction Helmet having accessory slot

Model 7500-HLKS - Helmet Mounting Bracket for attaching all BeastBeam™ Flashlights (Lights Sold Separately) to a Firefighter's Structural Helmet

Model 7500-3MAG - Mounting Base with 3 powerful magnets for attaching to steel surfaces (vertical or horizontal) and for snap in holding of all BeastBeam™ Flashlights, Model 7000 Signal Lights and Saberwand™ Traffic Wands

Model 7500-OPCH - Nylon Zippered Pouch for holding LED Road Flares (Lights Sold Separately)

Model 7500-MFC6 - Red Plastic Carrying Case for holding 6 MightyFlare™ LED Disc Road Flares (Lights Sold Separately)

Model 7500-MFS6 - Red Plastic Carrying Case for holding 6 MightyFlare Stick™ LED Road Flares (Lights Sold Separately)

Model 7500-MFS8 - Red Plastic Carrying Case for holding 8 MightyFlare Stick™ LED Road Flares (Lights Sold Separately)

Model 7500-TFP6 - Red Plastic Carrying Case that holds 6 ThriftyFlare™ LED Road Flares(Lights Sold Separately) Approximate Dimensions: 7'' L x 5 3/4'' W x 2 3/4'' H

Model 7500-CONR - Rubber Washer slides over MightyFlare Stick™ LED Road Flares and is required when placing MightyFlare Stick™ LED Road Flares in rubber traffic cones which have large top holes (up to 1-1/2'')

Model 7500-YSBG - Yellow Sandbag to be filled with sand for vertically holding BeastBeam™ Signal Lights Models 7000-7110 (Lights Sold Separately)

Model 7500-4RBA - Set of (4) NiMH Rechargeable ''AA'' Batteries with ''Extended Storage Life'' Chemistry

Model 7500-SWBR Swivel Bracket designed specifically for BeastBeam™ Pancake Lights.Fits Models 5120, 5121, 5125, 5151 and 5152

Model 7500-SCLP Heavy-Duty Black Stainless Steel Pocket Clip for all Saberwand® Traffic Wands or BeastBeam™ Flashlights. May be added to the light as an accessory at any time.

Model 7500-TNTP - 11'' Aluminum Tent Pin with Clip. Tent pin is hammered into ground and clip is used to vertically hold signal light Models 7000-7110

Model 7500-TFLG ThriftyFlare™ Replacement Legs

Model 7500-FC12 - Transparent Case to hold (12) individual Disc Shaped MightyFlare® LED Road Flares (Lights Sold Separately). Excellent for marking first responder during flare deployment.

Model 7500-FFC4 - Transparent Case to hold (4) individual Disc Shaped MightyFlare® LED Road Flares (Lights Sold Separately). Excellent for marking first responder during flare deployment.

Model 7500-FFC8 - Transparent Case to hold (8) individual Disc Shaped MightyFlare® LED Road Flares (Lights Sold Separately) Excellent for marking first responder during flare deployment.

Model 7500-PORT - Tool (Hole Saw 1 1/2 Dia.) to be used with a standard hand drill) for Rapid Cutting View Port Hole in existing Traffic Cones

Model 7500-BASE - Mounting Base for fastening (fasteners included) to horizontal or vertical surface and for Snap IN/OUT holding of all SaberWand™ Traffic Wands, Model 7000 Signal Lights or BeastBeam™ Flashlights (cannot be used if light has pocket clip)