LEDLights

Model 9000 MightyFlare Stick™ Kit includes (6) Model MFSB Steady Beam LED road flares with High Intensity Beams, ''AA'' Batteries and Magnetically Attached Bases. All in a Red Plastic Carrying Case.

Model 7500-HCLP Heavy-Duty Polymer Pocket Clip attaches to all SaberWand™ Traffic Wands and BeastBeam™ Flashlights. This may be added anytime

Model 7500-BASE - Mounting Base for fastening (fasteners included) to horizontal or vertical surface and for Snap IN/OUT holding of all SaberWand™ Traffic Wands, Model 7000 Signal Lights or BeastBeam™ Flashlights (cannot be used if light has pocket clip)

Model 8930 BeastBeam™ Blue Forensic Inspection Flashlight, Thumbswitch control with Dual Intensity, High Efficiency 455nm LED Lamp, Waterproof and (3) ''AA'' Alkaline Batteries. Plus Options selected below

Model 7500-HOLP - Black Polymer Holster for belts between 1 and 2-1/4'' wide. Holds all SaberWand® Traffic Wands & BeastBeam™ Flashlights. Light is pushed into holster and retained by friction. Holster also permits swiveling or non swiveling of light on belt.

Model 7500-HOLS - Black Polymer Holster/Clip for belts or other straps between 3/4'' and 1'' wide. Holds all SaberWand® Traffic Wands & BeastBeam™ Flashlights. Light is snaped onto the clip for holding to belt and must be rotated away from the clip to be removed. Design permits optional swiveling of lights on belt.

Model 9870 MightyFlare® Kit includes (8) Model MFAX Disc Shaped LED Lights with (5) Flashing Modes & (4) Intensity Settings in a Transparent Carrying Case. Each light includes ''AA'' Batteries.

Model 2010 BeastBeam™ Interior 12 VDC Vehicular Warning Light for Sloped Front/Rear Window including (4) Powerful LEDs, (8) Flash Patterns, Synchronized Flashing when used with similar Model lights, Single or any Two Color Light Beam, Waterproof Housing, (4) Suction Cup Rubber Mount, 10 ft. Wire Leads for Hard Wired Installation.

Model 9950 MightyFlare Stick™ Cone Kit for Traffic Cones with large Top Holes up to 1-1/2'' in diameter includes (6) Model MFCA LED Road Flares with (5) Flash Patterns, (4) Intensity Settings & Magnetic Bases in a Red Nylon Pouch. Each light includes includes ''AA'' Batteries.

Model 2602 BeastBeam™ Exterior 12 Volt DC LED White Steady Beam Work/Area Light with Double Seal For Underwater Fastening to a Flat Surface with Adjustable Bracket for UP/DOWN/LEFT/RIGHT aiming including (4) Powerful LEDs normally emitting Steady White Light Beam but available emitting other Colors, Stainless Steel Fasteners, Waterproof Housing and 4 ft. Wire Leads for Hard Wired Installation.

Model 2660 BeastBeam™ ATV & Off-Road Vehicle Driving Light Kit includes (2) BeastBeam™ Model 2600 12 VDC High Intensity LED Lights emitting White Spot Beams but available emitting other colors or beam patterns. Also, Waterproof Housings, Stainless Steel Mounting Brackets and Clamps for attaching to 3/4'' Bar.

Model 7500-MFS8 - Red Plastic Carrying Case for holding 8 MightyFlare Stick™ LED Road Flares (Lights Sold Separately)

Model 7500-FLS8 - Set of (8) 3'' x 3'' Fluorescent Orange Flags each on 4.5'' long rod, in a Tube Shaped Carrier

Model 4150 BeastBar™ Light Bar [Flat Surface Mounted, 60 LEDs, 33-7/8'' Long]

Model 4230 BeastBar™ Light Bar [Curved Surface Mounted, 36 LEDs, 20-1/2'' Long]

Model 4480 BeastBar™ Light Bar [Axial Mounted, 96 LEDs, 53-7/8'' Long]

Model 5152 -MiniBeast™ PANCAKE Single Color Steady Beam Illumination Light. Typically supplied emitting white light however you can choose any color and voltage. Wide angle, multi-directional illumination is visible throughout hemisphere. Compact waterproof housing (body 1-5⁄8'' w x 1-1⁄2'' h x 7⁄16'' d) fits into small spaces and reduces chances of impact damage. Excellent for illuminating trunks, compartments, work areas and anywhere auxiliary illumination is helpful. Used in all types of...

Model 5000 BeastBeam™ LED Flashlight includes Bezel Control, 120 Lumen LED, Waterproof, Dual Intensity and 3 ''AA'' Batteries.

Model 7500-FFC8 - Transparent Case to hold (8) individual Disc Shaped MightyFlare® LED Road Flares (Lights Sold Separately) Excellent for marking first responder during flare deployment.

Model 7500-FC12 - Transparent Case to hold (12) individual Disc Shaped MightyFlare® LED Road Flares (Lights Sold Separately). Excellent for marking first responder during flare deployment.

Model 7500-TNTP - 11'' Aluminum Tent Pin with Clip. Tent pin is hammered into ground and clip is used to vertically hold signal light Models 7000-7110

Model 2056 StormLight® Kit - 7 Light Kit Contains: (1) 4x1 Dual Color [24-28 VDC] LED Windshield Light with Switch & Cigarette Lighter Adapter (2) 4x1 Dual Color [24-28 VDC] LED Tailgate Lights (2) 4x1 Dual Color [24-28 VDC] LED Front Fender Side Lights (2) 4x1 Dual Color [24-28 VDC] LED Front Grill Lights

Model 5151 - MiniBeast™ Multi-Use Light, emitting a single color & steady beam with a back surface mount. Each light includes 2 ft. of wire (Power and Ground). Patent Pending optics provide a choice of a concentrated high-power SPOT BEAM or a very wide angle SWEPT BEAM, making the light highly visible, even for those 75 degrees off the beam axis. Note: If the emitted light is not required to be concentrated into a beam because visibility from all angles is desirable, choose NO OPTIC or...

Model 7500-PORT - Tool (Hole Saw 1 1/2 Dia.) to be used with a standard hand drill) for Rapid Cutting View Port Hole in existing Traffic Cones